The mobile no . 7 signaling network of 2 mbit s high speed signaling link 高速信令鏈路架構移動通信七號信令網
Signaling link manager slm 信令鏈路管理程序
Active signaling link 激活信令鏈路
Test specification for no . 7 signalling system - the ambit s high speed signalling link No . 7信令系統測試規范- 2mbit s高速信令鏈路
This layer defines the physical , electrical , and functional characteristics of the signaling links connecting ss7 components 這一層定義了連接ss7組件的信令鏈路的物理的、電氣的和功能性特征。
The pre - determined path , consisting of a succession of signalling points / signalling transfer points and the interconnecting signalling links , that a message takes through the signalling network between the origination point and the destination point is the signalling route for that signalling relation 信令路由是從源信令點到達目的信令點所要經過的預先確定的信令消息傳送路徑,包含一系列信令點/信令轉接點及他們之間的互聯信令鏈路。
At present , we can track the signaling links in the 155 mbs ports of a switch only by using the signaling of the switch itself rather than the external analyzer of the ccs 7 . this causes inconvenience to maintenance . it is expected that manufacturers will enhance the tracking and monitoring functionality of their products and training switching and maintenance personnel concerning routine maintenance of the 155 mbs port 目前,我們只能利用交換機本身的信令觀察手段對交換機155mbits端口中的信令鏈路進行跟蹤、分析,而不能通過外掛七號信令分析儀對信令進行監測,給維護工作帶來了不便,有待于生產交換機的廠家加強這方面的功能。
Due to a & b double flats setting of stp ( signalling transfer point ) in different place , and working on mode of payload - sharing on signalling links ( couple links ) between sp ( signalling point ) and stp , the calling signalling sequence cannot be collected completely from single stp . thus it is difficult to synthesize signalling affair in the signalling supervision system . the first , this thesis illuminateds network architecture of no . 7 signalling network and no . 7 signalling centralized supervision system 由于七號信令網的信令轉接點設備stp ( signallingtransferpoint )采用a 、 b雙平面異地設置,下一級的信令點設備sp ( signallingpoint )至上一級的一對stp之間的信令路由采用負荷分擔方式工作, sp至stp對的負荷分擔鏈路形成耦合鏈路,導致在一個stp處無法采集到完整的呼叫信令序列,這樣就給監測系統核心部分之一的信令事件合成帶來了極大的難度。